Our hours of operation are Mon - Fri from 8:00 a.m. to 3:00 p.m.
LUWIREP® 70 repair system for conveyor belts.

LUWIREP® 70 repair system for conveyor belts.

Have you heard of LUWIREP® 70? It is a system for repairing conveyor belts and protecting against rubber wear that supercedes the most conventional methods in order to provide efficiency and speed in the workplace. At Uniones Adhesivas, we know that it is a good option and we want to explain all the steps to be followed to make correct use of it.

This material has been optimised to meet the needs of the rubber and repair any damage in the shortest possible time so that it can be put back into operation. Below are the steps to follow to position it correctly.

  1. Cleaning and removing defects.

It is essential to clean the surface and remove defects along the edges of the area that requires repair. This is in order to ensure that the adhesion is optimal for work to continue as normal and to guarantee long-lasting results.

  1. Application of the Primer.

The second step to take in order to ensure good end results is to apply a coat of primer on the area to be repaired.

  1. Preparing the cartridge.

It is important to know how to prepare the cartridge and see how much product is needed. Also, you must use the mixing nozzle to blend the different components. Another point to keep in mind is to have additional cartridges ready and prepared and keep them close to the repair if the area to be repaired is large and you know that you are going to need to top up the component parts.

  1. Application of LUWIREP 70.

The fourth step is to apply the product to the area to be repaired, which was primed earlier. You must be careful to cover only the area where there is damage.

  1. Allow sufficient time for curing.

It is essential that sufficient time be allowed for curing to obtain the best results. You should be aware that a 4-mm-thick repair can be set after around 15 minutes.

  1. Finishing curing and removing defects.

Once the curing is complete, it is essential to remove defects from the area so that the entire surface is uniform. In this way, you will see excellent results that allow work to continue as if no damage had ever occurred.

If you would like to purchase this LUWIREP® 70 repair system, we recommend that you purchase it from the Pegalic glue online shop.

In addition, at Uniones Adhesivas we have a team of experts who can give you advice regarding the necessary products and curing times. Do not hesitate to contact us to find out more about LUWIREP® 70 and how it works.

All comments

Leave a Reply