OTTOCOLL M500 The water resistant premium hybrid adhesive/sealant Cart. 310 ml 20 Units.
OTTOCOLL® M 500 The water-resistant premium hybrid adhesive/sealant
OTTOCOLL® M 500 Characteristics: 1-component adhesive and sealant based on STP hybrid polymer Excellent primerless adhesion on numerous substrates - even when exposed to water Very high mechanical strength, resistance to notches, tension and tearing For stress-compensating bonding and dynamic stresses Low odour Free of isocyanates Silicone-free Good weathering and ageing resistance Compatible with coatings according to DIN 52452 Can be painted and varnished – please observe application instruction in TDS
OTTOCOLL® M 500 Fields of application: For application in interior and exterior areas Elastic bonding and mounting of various materials such as wood, derived wood products, glass, metals (e. g. aluminium, stainless steel, anodising aluminium, brass, copper), plastics (e. g. unplasticised PVC, plasticised PVC, fibrereinforced plastics etc.), mineral substrates (e. g. brick, tile, ceramic), fireproof building panels (gypsum board etc.) For the bodywork and vehicle construction, waggon and container construction, metal construction and apparatus engineering, ship building Sealing of air condition and ventilation systems Different building applications such as staircase construction etc. Bonding of lacquered and enamelled glass Bonding of stone, natural stone and ceramic Bonding and sealing of OTTOFLEX Sealing Strip (in the overlapping area) and accessories such as Sealing Tape, Corner Tapes and Sealing Sleeves (according to the requirements of ETAG 022)
OTTOCOLL® M 500 Standards and tests: Declaration of no objection – tested for use in food-related area (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg, Germany) Suitable for applications according to IVD instruction sheet no. 12+19-1+21+24+30+31+35 (IVD = German industry association sealants) Testet on coated glass (2-comp. PU Direct Decklack 7-530 made by Selemix System) made by Glas Nagel - status 11/2006 The information provided with regards to our adhesion and compatibility tests reflects the status at the time of testing. Changes to the coatings are possible but outside our sphere of influence. With regards to these we advise to contact the producers of glass/coatings concerned. Conform to LEED® v3 IEQ-credits 4.1 adhesives and sealants For DGNB classifications, see the product page on the OTTO website French VOC-emission class A+ Declaration in "baubook" Austria
OTTOCOLL® M 500 Packaging: Due to typographical reasons the colours shown below may differ from the original colours of the products. Please request our colour charts for precise colour examples.
- 1 Box 20 Units.
- Cart. 310 ml
- French VOC-emission class A+
- ETAG 022
- DIN 52452
- Swimming pools